How To Fix AirPods Keep Cutting Out? (Solutions)

If you find it increasingly difficult to use your AirPods because they keep cutting out for unknown reasons, we’ve got you covered. Airpods cutting out isn’t a unique problem and could happen with either the originalAirPods or theAirPods Pro.

AirPods, like most other gadgets, aren’t perfect and are susceptible to glitches. In this article, you’ll learn some of the possible reasons why yourAirPods keep cutting out and how to fix it.

Why Do MyAirPods Keep Cutting Out?

There are many reasons why yourAirPods may be cutting out. In most cases, it’s usually an issue with Bluetooth interference. This happens when there is a concentration of Bluetooth devices around you, leading to mashed-up signals which might cause your device to cut out.

How Do You Fix AirPods That Keep Cutting Out? (Solutions)

There are numerous tips and tricks to help fix yourAirPods cutting out, and most of these are free DIY solutions you can do anywhere. Here are some of the best ways to fix your AirPods yourself.

How Do You Fix AirPods That Keep Cutting Out

Disconnect Your AirPods Then Reconnect Them

The first fix to try onAirPods that keeps cutting out is trying to reconnect the device. Instinctively, the first thing that comes to your mind when any electronic device stops working should be to restart it, and this applies to your AirPods too. Here are the steps to reconnect your AirPods when it cuts out.

  • Put the AirPods inside their casing, close the lid and wait for around 15 seconds.
  • Open the lid, press and hold the setup button located at the back of the casing.
  • Hold on for the indicator to flash white and amber.
  • Your AirPods should have reset by now.
  • Enable Bluetooth on your iPhone and hold your AirPods close to the phone to reconnect them.
  • Setup the on your iPhone.

Examine Bluetooth

Since AirPods uses Bluetooth to connect to your iPhone, it only makes sense to troubleshoot the state of your Bluetooth connection once it cuts out. Go to the control center on your iPhone and check the Bluetooth status. If the Bluetooth is on, turn it off and on again.

Tapping the green toggle on the Bluetooth option on your settings will turn it to grey, disabling Bluetooth on the device. Tap on the button once again to enable Bluetooth, setting up a connection to your phone.

Deactivate Automatic Detection

There is an automatic detection feature on AirPods to automatically detect when the device is in your ear. Turning on this feature might disrupt the device’s functionality for some users. If your AirPods keep cutting out, consider disabling the automatic detection feature.

To do this, simply go to your iPhone Settings and select Bluetooth. Under the “My Devices” option, click on the “I” icon next to connected Airpods and turn off the toggle for automatic ear detection.

Forget And Repair Your AirPods

Disconnect and reconnect the AirPods to see if it will fix the audio-related glitch. This particular strategy works for most users, and it should work for you too. Go to your Bluetooth settings, forget the AirPod on your list of paired devices and try pairing it again.

Forget And Repair Your Airpods

Reset The Audio Device Settings

Resetting your audio device settings might also fix the issue of you’re AirPods cutting out while you’re using it.

Reset The AirPods

Sometimes, a fresh restart is all you need to bring your AirPods back to normal. This is entirely safe because it is not a storage device, so you are not losing anything, and you’ll only need to reconnect when you’re done.

To reset your AirPod, put them back into their smart case and shut the lid. Press and hold the status button till the indicator starts flashing amber. There you have it; your AirPod is reset.

Ensure That You Have The Right Software

If the AirPod doesn’t support your iOS version, it could result in audio glitches. For instance, AirPods 3 works best with iOS 15.1 or macOS 12, while Airpods Pro works best with iOS 13.2 and macOS 10 or newer versions. To use AirPods 2, you should have a device iOS 12.2 or macOS 10.14.

Sign Out Of Apple iCloud

Signing out of your iCloud may sound like a weird way to attempt fixing your AirPods cutting out, but it works for some people. Electronic gadgets can be very unpredictable, and you just can’t tell what might fix your AirPods.

To sign out of your iCloud, follow the steps below.

  • Enter your iPhone settings and select Apple ID.
  • Click on the sign-out button at the bottom of the page.
  • Enter your Apple ID.
  • Click on Sign Out and confirm your action.
  • You would be logged out of your iCloud account; you can restart your device and reattempt logging in.

Keep Your Device AndAirPods Closer

Since the AirPods connect to your iPhone via Bluetooth, being too far from the device may affect the audio quality or cause it to cut out completely. For the best results, try to maintain a distance not exceeding 30 feet between both devices.

Keep Your Device And Airpods Closer

Ensure Audio Settings

Check your audio settings and ensure yourAirPods are selected as an audio device. If they’re not, tap on the AirPlay icon below the audio track, you are currently playing and select yourAirPods.

Make sure you haveAirPods selected from the audio options available. If your AirPods are acting up during a call, tap on the speaker icon to change the audio source for the call to avoid disruptions.

Deactivate Automatic Switching

Automatic switching is a feature that lets yourAirPods quickly alternate between Apple devices when you are playing music on iOS 14. Since it chooses the best service autonomously, this feature can lead to unwanted disconnections if you have other active Apple devices nearby.

To disable this feature, navigate to your settings app and select Bluetooth. Tap the “i” icon beside the specificAirPods in question. Connect theAirPod to the iPhone and finally select the “When Last Connected to this iPhone option.”

This should fix the auto switch issue and provide you with a better listening experience.

Use Same AirPods Most Of The Time

Using only one pair of earbuds might help minimize the chances of yourAirPods cutting out. You can also configure yourAirPods always to use the same mic to reduce the chances of cutting out.

To configure the mic, first, open theAirPod lid. Then go to Settings on your Apple device and click on Bluetooth. SelectAirPods and click on the information icon. Choose the microphone settings and adjust them to your choice.

Clean Your AirPods

Cleaning yourAirPods might be the trick you’ve been looking for. Dirt can deal different types of damage, and yourAirPods cutting out might just be the result of the accumulation of dirt. You should be careful while cleaning, so you don’t damage the device due to its delicateness. Here are a few tips that might help.

  • Use soft, dry, lint-free cloths to clean your Airpod casing.
  • Clean the outside of the earbuds with soft white cotton.
  • Do not allow water or any liquid to get into the earbud.

Unpair Your Apple Watch

Consider unpairing your Apple Watch to see if that solves the problem. Connecting your Apple Watch and yourAirPods simultaneously might overload your Bluetooth, causing the gadget to cut out. If you have other gadgets connected to your phone, consider disconnecting them to see how it goes.

Check Your AirPods Battery Level

The battery level on yourAirPod may directly affect the audio quality, and if the battery is low, the audio quality may be affected too. Open the lid and hold the case beside your phone to check the battery status. The battery level will appear on your phone.

Alternatively, you can check the battery percentage using an iPhone widget. If you haven’t added the battery widget, you can do that by scrolling to “edit” and adding the battery widgets. 

After adding the widget, you can track your battery levels for yourAirPods and all other connected Apple devices from your phone’s homepage.

Check Sources Of WiFi And Bluetooth Interference

Check your connected device list on your Bluetooth and Wi-Fi to see if there’s any device causing interference. Also, check if you are close to fluorescent lights, microwaves, and cordless phones because these devices can potentially interfere with Bluetooth signals.

On Mac, Change The Input And Output

If you are using yourAirPods with a Mac, you might need to make slight changes to your sound settings. Go to system preferences and change the output device to yourAirPods. Change the audio input to theAirPods, too, if you don’t have an external mic.

Turn Off Wifi On Your iPhone And iPad.

If your Wi-Fi is on, consider turning it off. Some users find out that turning off their Wi-Fi corrects audio bugs on theirAirPods in some cases. While I’m not sure why this happens, it may be some sort of interference with the Bluetooth.

Why Do My AirPods Keep Stopping And Glitching?

Faulty sensors are usually the primary reason why yourAirPods keep stopping and glitching. You can manually correct this fault by switching off the auto-detection feature on your iPhone.

Why Do My AirPods Keep Stopping And Glitching

Shaky Bluetooth connections and poor audio settings are also the possible reasons you may experience potato quality audio on yourAirPods.

Why Did One Of My AirPods Randomly Stop Working?

A low battery might be the reason why one of yourAirPods randomly stops working. Even though the twoAirPods charge together, they drain batteries at their own pace, and charging the AirPods might just fix the problem.

FAQs

Why Do My AirPods Keep Cutting Out From My Laptop?

When numerous devices with the same wavelengths try initiating a connection to a single device at the same time, it causes a phenomenon known as Bluetooth interference. Bluetooth interference can prevent yourAirPods from connecting to your laptop, but other software issues could be at play too.

Why Do My AirPods Keep Cutting Out In One Ear?

AirPods charge together, but their battery may drain at different speeds. It’s almost impossible to ensure drain the batteries at the same pace. Checking the battery level and charging as required should fix the problem. You can check out some of the other solutions above if it doesn’t.

Why Do My AirPods Keep Cutting Out When My Phone Is In My Pocket?

If yourAirPods only cuts out when your phone is in your pocket, then it might be a connection issue. The most logical explanation in this scenario is something around you is disrupting your connection, and it may be your body, your bag, or even the pocket itself.

Why Do My AirPods Keep Cutting Out On Phone Calls?

AirPods usually cut out during phone calls for the same reason that they do when you are listening to audio. It may be because of Bluetooth interference, low battery, automatic ear detection bugs, and others. You should try setting theAirPods as the output speaker to see if that solves the problem.

Why Do My AirPods Keep Cutting Out Android?

YourAirPods may be cutting out on your Android phone due to Bluetooth interference. While theAirPods experience on Android is severely limited compared to an iPhone, you shouldn’t be experiencing cutouts. You can try out earbuds for Android phones ifAirPods don’t seem to work fine.

Why Do My AirPods Keep Cutting Out When I Move?

It could be a result of signal disruption. Faulty sensors or mics might also cause yourAirPods to cut out when you move. Try resetting yourAirPods to see if that fixes the problem, and if it doesn’t, you may have to contact technical support.

Why Do My AirPods Keep Cutting Out Music?

YourAirPods should be able to handle music playback just fine. But if it cuts out constantly, you may be having Bluetooth interference. YourAirPods may also cut out music if you use an outdated version of iOS or macOS. Software glitches are some other reasons why yourAirPods may cut out music.

Why Do My AirPods Keep Cutting Out From My Mac?

If your AirPods works fine for other devices but fails to work with your Mac. The problem is definitely from your Mac. If your Mac isn’t running the latest version of macOS, try updating it to see if the problem persists.

However, if the AirPods are cut out from other devices as well, then it’s probably an issue with yourAirPods firmware, which a factory reset could fix. 

Conclusion

AirPods should be one of the best audio devices for iPhones. It becomes genuinely frustrating when a device that should provide a premium audio experience starts to become buggy.

Using the tips from this article, you can learn some of the primary reasons why yourAirPods keep cutting out and some of the best ways to fix it.

Since prevention is said to be better than cure, you should try observing good maintenance ethics to ensure that you’ll never have to fix yourAirPods. But since electronic devices are pretty unpredictable, you just can’t tell.

You would also like these (Give it a read):

Leave a Comment